Keyless/Power Door Lock System
|
22-230 |
Cavity | Wire | Test condition | Test: Desired result | Possible cause if result is not obtained | ||
J6 | ORN | Under all conditions | Attach to ground:
The horn should sound. |
|
||
J7 | WHT | Under all conditions | Check for voltage to ground:
There should be battery voltage. |
|
||
K2 | BLU/ORN | Under all conditions | Check for continuity between the K2 terminal and the keyless receiver unit 5P connector No. 2 terminal with the 5P connector disconnected:
There should be continuity. |
|
||
P18 | RED | Trunk lid or tailgate open | Check for voltage to ground:
There should be 1 V or less. |
|
||
Trunk lid or tailgate closed | Check for voltage to ground:
There should be 5 V or more. |
|
||||
Q2 | GRN/WHT | Left (right) rear door open | Check for voltage to ground:
There should be 1 V or less. |
|
||
Left (right) rear door closed | Check for voltage to ground:
There should be 5 V or more. |
|
||||
Q3 | GRN | Driver's door open | Check for voltage to ground: There should be 1 V or less. |
|
||
Driver's door closed | Check for voltage to ground:
There should be 5 V or more |
|
||||
Q4 | LT GRN/RED | Front passenger's door open | Check for voltage to ground:
There should be 1 V or less |
|
||
Front passenger's door closed | Check for voltage to ground: There should be 5 V or more |
|
||||
X5 | RED/WHT | Ignition key inserted into the ignition switch | Check for voltage to ground:
There should be 1 V or less. |
|
||
Ignition key removed from the ignition switch | Check for voltage to ground:
There should be 5 V or more |
|
||||
Y8 | YEL/RED | Driver's door lock knob switch locked | Check for voltage to ground:
There should be 1 V or less. |
|
||
Driver's door lock knob switch unlocked | Check for voltage to ground: There should be 5 V or more |
|
||||
Y10 | WHT/GRN | Driver's door lock switch unlocked | Check for voltage to ground:
There should be 1 V or less. |
|
||
Driver's door lock switch in neutral | Check for voltage to ground:
There should be 5 V or more |
|
||||
Y12 | WHT/BLU | Driver's door lock switch locked | Check for voltage to ground:
There should be 1 V or less. |
|
||
Driver's door lock switch in neutral | Check for voltage to ground:
There should be 5 V or more. |
|
||||
Y7 | WHT/BLK | Driver's door lock switch locked | Check for voltage to ground:
There should be 1 V or less |
|
||
Driver's door lock switch in neutral | Check for voltage to ground:
There should be 5 V or more. |
|
||||
Y2 | BLU/ORN | Keyless transmitter unlock button is pushed | Check for continuity between the Y2 terminal and security control unit A17 terminal:
There should be continuity. |
|
||
Y3 | LT GRN/BLK | Keyless transmitter unlock button is pushed | Check for continuity between the Y3 terminal and security control unit A6 terminal:
There should be continuity. |
|