Keyless/Power Door Lock System
|
22-229 |
Cavity | Wire | Test condition | Test: Desired result | Possible cause if result is not obtained |
M7 | YEL/BLK | Connect J7 terminal to *³M7 or *4M6 [M9] terminal, and M9 [*³M7 or *4M6] terminal to J4 terminal. | Check actuator operation:
The driver's door lock actuator should lock [unlock]. |
|
M9 | *¹YEL/GRN
*²YEL |
|||
M6 | YEL/BLK | Connect J7 terminal to *³M6 or *4M7 [M8] terminal, and M8 [*³M6 or *4M7] terminal to J4 terminal. | Check actuator operation: The front passenger's door lock actuator should lock [unlock]. |
|
M8 | YEL | |||
P16 | YEL | Connect J7 terminal to P17 [P16] terminal, and P16 [P17] terminal to J4 terminal. | Check actuator operation: The both rear door lock actuator should lock [unlock]. |
|
P17 | YEL/BLK |
*¹: 4-door *³: LHD type*²: 5-door *4: RHD type
Cavity | Wire | Test condition | Test: Desired result | Possible cause if result is not obtained |
C11 | BLU | Under all conditions | Attach to ground:
Parking, side marker, license plate lights and taillights should come on. |
|
F7 | BLU/RED | Under all conditions | Attach to ground:
Headlights should come on. |
|
J2 | WHT/RED | Under all conditions | Check for voltage to ground:
There should be battery voltage. |
|
J4 | BLK | Under all conditions | Check for voltage to ground:
There should be 1 V or less. |
|