Intake Manifold and Exhaust System

Exhaust Pipe and Muffler Replacement

9-8  

NOTE: Use new gaskets and self-locking nuts when reassembling.

  1. GASKET, Replace
  2. MUFFLER
  3. 8 x 1.25 mm, 22 Nm (2.2kgf/m, 16 lbf/ft), Replace

    Tighten the bolts in steps alternating side-to-side

  4. EXHAUST PIPE B
  5. HEAT SHIELD
  6. GASKET, Replace
  7. SECONDARY HEATED OXYGEN SENSOR (SECONDARY HO2S)

    44 Nm (4.5 kgf/m, 33 lbf/ft)

  8. THREE WAY CATALYTIC CONVERTER (TWC)
  9. PRIMARY HEATED OXYGEN SENSOR (PRIMARY HO2S)

    44 Nm (4.5 kgf/m, 33 lbf/ft)

  10. 8 x 1.25 mm, 22 Nm (2.2 kgf/m, 16 lbf/ft), Replace

    Tighten the bolts insteps alternating side-to-side

  11. GASKET, Replace
  12. SELF-LOCKING NUT, 10 x 1.25 mm, 33 Nm (3.4 kgf/m, 25 lbf/ft), Replace

aaa