Intake Manifold and Exhaust System

Exhaust Manifold Removal and Installation

9-7  

  1. Remove the VTEC solenoid valve (see page 11-110).
  1. Remove the intermediate shaft heat cover (see step 2 on page 16-18).
  1. Remove the cover and exhaust manifold bracket, then remove the exhaust manifold.

  1. COVER
  2. EXHAUST MANIFOLD
  3. GASKET

    Replace

  4. SELF-LOCKING NUT

    10 x 1.25 mm

    44 Nm (4.5 kgf/m, 33 lbf/ft)

  5. 10 x 1.25 mm

    44 Nm (4.5 kgf/m, 33 lbf/ft)

  6. 8 x 1.25 mm

    22 Nm (2.2 kgf/m, 16 lbf/ft)

    Replace.

    Tighten the bolts in steps, alternating side-to-side.

  7. GASKET

    Replace.

  8. WASHER
  9. EXHAUST MANIFOLD BRACKET

  1. Install the exhaust manifold and tighten the bolts/nuts in a criss-cross pattern in two or three steps, beginning with the inner bolt.
  1. Install the other parts in the reverse order of removal.
aaa