Maintenance Schedule for Severe Conditions
|
3-7 |
NOTES | REFERENCE MANUAL, SECTION and PAGE |
(see page 8-5) | |
(see page 8-6) | |
Refer to the 2001 Civic shop manuals (see page 11-147) (see page 11-447) | |
Check the valve clearance. | Refer to the 2001 Civic shop manuals (see page 6-14) |
Refer to the 2001 Civic shop manuals (see page 11-138) (see page 11-296)
Refer to the 2001 Civic shop manuals (see page 11-438) (see page 11-571) |
|
(see page 4-25) | |
|
Refer to the 2001 Civic shop manuals (see page 17-23) |
Refer to the 2001 Civic shop manuals (see page 11-125) (see page 11-285)
Refer to the 2001 Civic shop manuals (see page 11-425) (see page 11-560) |
|
Use genuine Honda All Season Antifreeze/Coolant Type 2. | (see page 10-8) |
Use genuine Honda MTF (Manual Transmission Fluid). | (see page 13-3) |
|
Refer to the 2001 Civic shop manuals (see page 19-3) |
Use only DOT 3 or DOT 4 brake fluid. (We recommend Genuine Honda Brake Fluid.)
Check that brake fluid level is between the upper and lower marks on the reservoir. |
Refer to the 2001 Civic shop manuals (see page 19-7) |
Check the parking brake operation. | Refer to the 2001 Civic shop manuals (see page 19-6) |
Check the position of the headlight. | Refer to the 2001 Civic shop manuals (see page 22-114) |
Check for road stability, noise, vibrations and dashboard operation. | - |
|
- |
|
Refer to the 2001 Civic shop manuals (see page 17-5) |
|
Refer to the 2001 Civic shop manuals (see page 18-3) |
|
Refer to the 2001 Civic shop manuals (see page 16-3) |
Check the master cylinder, proportioning control valve and ABS modulator and leakage. | Refer to the 2001 Civic shop manuals (see page 19-48) |
Check for leaks. | - |
Check the catalytic converter heat shield, exhaust pipe and muffler for damage, leaks and tightness. | (see page 9-5) |
Check fuel lines for loose connections, cracks and deterioration. Retighten loose connections and replace any damaged parts. | Refer to the 2001 Civic shop manuals (see page 11-132) (see page 11-290)
Refer to the 2001 Civic shop manuals (see page 11-432) (see page 11-565) |
Check for pressure, puncture or cuts and irregular thread wear. | - |