M/T Differential

Differential Thrust Clearance Adjustment (cont'd)

13-65  

  1. If the clearance is more than the standard, select a new shim from the following table. If the clearance measured in step 5 is within the standard, go to step 9.

    80 mm Shim

  Part Number Thickness
A 41441-PL3-B00 1.0 mm (0.0394 in.)
B 41442-PL3-B00 1.1 mm (0.0433 in.)
C 41443-PL3-B00 1.2 mm (0.0472 in.)
D 41444-PL3-B00 1.3 mm (0.0512 in.)
E 41445-PL3-B00 1.4 mm (0.0551 in.)
F 41446-PL3-B00 1.5 mm (0.0591 in.)
G 41447-PL3-B00 1.6 mm (0.0630 in.)
H 41448-PL3-B00 1.7 mm (0.0669 in.)
J 41449-PL3-B00 1.8 mm (0.0709 in.)
K 41450-PL3-B00 1.05 mm (0.0413 in.)
L 41451-PL3-B00 1.15 mm (0.0453 in.)
M 41452-PL3-B00 1.25 mm (0.0492 in.)
N 41453-PL3-B00 1.35 mm (0.0531 in.)
P 41454-PL3-B00 1.45 mm (0.0571 in.)
Q 41455-PL3-B00 1.55 mm (0.0610 in.)
R 41456-PL3-B00 1.65 mm (0.0650 in.)
S 41457-PL3-B00 1.75 mm (0.0689 in.)

  1. Remove the bolts and transmission housing.
  1. Replace the thrust shim selected in step 6, then recheck the clearance.
  1. Reinstall the transmission.