Special Tool Required
Driver, 40 mm I.D., 07746-0030100
- Install the 80 mm shim that is the same size as the one you removed.
- Install the differential assembly into the clutch housing.
- Install the transmission housing onto the clutch housing, then tighten the 8 mm flange bolts in a criss-cross pattern in several steps.
8 x 1.25 mm
27 Nm (2.8 kgf/m, 20 Ibf/ft)
- Use the special tool to bottom the differential assembly in the clutch housing.
- Measure clearance between 80 mm shim and bearing outer race in transmission housing.
Standard:
0 - 0.10 mm (0 - 0.004 in.)
