Standards and Service Limits
|
2-15 |
Item | Measurement | Qualification | Standard or New | |||||
Wire Diameter | O.D. | Free Length | No. of Coil | |||||
Secondary valve body springs, refer to the '01 Civic Shop Manual on this CD (see page 14-187) | 3-4 shift valve spring | 0.9 mm
(0.035 in.) |
7.6 mm
(0.299 in.) |
57.0 mm
(2.244 in.) |
26.8 | |||
2-3 shift valve spring | 0.9 mm
(0.035 in.) |
7.6 mm
(0.299 in.) |
57.0 mm
(2.244 in.) |
26.8 | ||||
4th exhaust valve spring | 0.9 mm
(0.035 in.) |
6.1 mm
(0.240 in.) |
36.4 mm
(1.433 in.) |
19.5 | ||||
3-4 orifice control valve spring | 0.7 mm
(0.028 in.) |
6.6 mm
(0.260 in.) |
37.5 mm
(1.476 in.) |
24.6 | ||||
Servo body springs (see page 14-94) | 1st accumulator spring | 2.1 mm
(0.083 in.) |
16.0 mm
(0.630 in.) |
89.1 mm
(3.508 in.) |
16.2 | |||
4th accumulator spring A | 2.6 mm
(0.102 in.) |
17.0 mm
(0.669 in.) |
88.4 mm
(3.480 in.) |
14.2 | ||||
4th accumulator spring B | 2.3 mm
(0.091 in.) |
10.2 mm
(0.402 in.) |
51.6 mm
(2.031 in.) |
13.8 | ||||
3rd accumulator spring A | 2.8 mm
(0.110 in.) |
17.5 mm
(0.689 in.) |
94.3 mm
(3.713 in.) |
15.6 | ||||
3rd accumulator spring B | 2.1 mm
(0.083 in.) |
31.0 mm
(1.220 in.) |
38.2 mm
(1.504 in.) |
2.4 | ||||
2nd accumulator spring C | 2.2 mm
(0.087 in.) |
14.5 mm
(0.571 in.) |
68.0 mm
(2.677 in.) |
13.9 | ||||
2nd accumulator spring A | 2.4 mm
(0.094 in.) |
29.0 mm
(1.142 in.) |
39.0 mm
(1.535 in.) |
2.9 | ||||
Lock-up valve body springs, refer to the Civic Shop Manual on this CD (see page 14-189) | Lock-up shift valve spring | 0.9 mm
(0.035 in.) |
7.6 mm
(0.299 in.) |
73.7 mm
(2.902 in.) |
32.0 | |||
Lock-up timing valve spring | 0.9 mm
(0.035 in.) |
8.1 mm
(0.319 in.) |
80.7 mm
(3.177 in.) |
54.2 |
Item | Measurement | Qualification | Standard or New | Service Limit |
A/T differential carrier | Pinion shaft contact area I.D. | 18-010-18.028 mm
(0.709-0.710 in.) |
- | |
Carrier-to-pinion shaft clearance | 0.023-0.057 mm
(0.001-0.002 in.) |
0.1 mm (0.004 in.) | ||
Driveshaft contact area I.D. | 26.025-26.045 mm
(1.0246-1.0254 in.) |
- | ||
Carrier-to-driveshaft clearance | 0.045-0.086 mm
(0.002-0.003 in.) |
0.12 mm
(0.005 in.) |
||
Set ring-to-carrier bearing outer race clearance | 0-0.15 mm
(0-0.006 in.) |
Adjust | ||
A/T differential pinion gear | Backlash | 0.05-0.15 mm
(0.002-0.006 in.) |
- | |
I.D. | 18.042-18.066 mm
(0.7103-0.7113 in.) |
- | ||
Pinion gear-to-pinion shaft clearance | 0.055-0.095 mm
(0.0022-0.0037 in.) |
0.15 mm (0.006 in.) |