Keyless/Power Door Lock System
|
22-233 |
Cavity |
Wire |
Test condition |
Test: Desired result |
Possible cause if result is not obtained |
P18 |
RED |
Tailgate open |
Check for voltage to ground: There should be 1 V or less. |
|
Tailgate closed |
Check for voltage to ground: There should be 5 V or more. | |||
X5 |
RED/WHT |
Ignition key inserted into the ignition switch |
Check for voltage to ground: There should be 1 V or less. |
|
Ignition key removed from the ignition switch |
Check for voltage to ground: There should be 5 V or more. | |||
Q3 |
GRN |
Driver's door open |
Check for voltage to ground: There should be 1 V or less. |
|
Driver's door closed |
Check for voltage to ground: There should be 5 V or more. | |||
Q4 |
LT GRN/RED |
Front passenger's door open |
Check for voltage to ground: There should be 1 V or less. |
|
Front passenger's door closed |
Check for voltage to ground: There should be 5 V or more. | |||
Q2 |
GRN/WHT |
Left (right) rear door open |
Check for voltage to ground: There should be 1 V or less. |
|
Left (right) rear door closed |
Check for voltage to ground: There should be 5 V or more. | |||
Y4 |
BRN/WHT |
Front passenger's or left rear or right rear door lock knob switch unlocked |
Check for voltage to ground: There should be 1 V or less. |
|
X6 |
WHT/RED |
Driver's door key cylinder switch lock |
Check for voltage to ground: There should be 1 V or less. |
|
Driver's door key cylinder switch in neutral |
Check for voltage to ground: There should be 5 V or more. | |||
Y13 |
WHT |
Driver's door key cylinder switch unlocked |
Check for voltage to ground: There should be 1 V or less. | |
Driver's door key cylinder switch in neutral |
Check for voltage to ground: There should be 5 V or more. | |||
X2 |
LT BLU |
Front passenger's door key cylinder switch lock |
Check for voltage to ground: There should be 1 V or less. |
|
Front passenger's door key cylinder switch in neutral |
Check for voltage to ground: There should be 5 V or more. | |||
Y11 |
GRY |
Tailgate key cylinder switch lock |
Check for voltage to ground: There should be 1 V or less. |
|
Tailgate key cylinder switch in neutral |
Check for voltage to ground: There should be 5 V or more. |