Measure voltage between ECM/PCM connector terminal A7 and body ground. ECM/PCM CONNECTOR A (31P) Wire side of female terminals Is there about 5 V? YES - Repair open in the wire between the ECM/PCM (A7) and the CKP sensor. NO - Go to step 11. Turn the ignition switch OFF. Disconnect ECM/PCM connector A (31P). Check for continuity between ECM/PCM connector terminal A7 and body ground. ECM/PCM CONNECTOR A (31P) Wire side of female terminals Is there continuity? YES - Repair short in the wire between the ECM/PCM (A7) and the CKP sensor. NO - Substitute a known-good ECM/PCM and recheck (see page 11-313). If symptom/indication goes away, replace the original ECM/PCM.