Intake Manifold and Exhaust System

Exhaust Pipe and Muffler Replacement (cont'd)

 9-4  

NOTE: Use new gaskets and self-locking nuts when reassembling.

D16V3 engine:

  1. GASKET

    Replace.

  2. MUFFLER
  3. 8 x 1.25 mm

    22 Nm (2.2 kgf/m, 16 lbf/ft)

    Replace.

    Tighten the bolts in steps, alternating side-to-side.

  4. HEAT SHIELD
  5. 6 X 1.0 mm

    9.8 Nm (1.0 kgf/m, 7.2 lbf/ft)

  6. EXHAUST PIPE B
  7. GASKET

    Replace.

  8. EXHAUST PIPE A
  9. 8 x 1.25 mm

    22 Nm (2.2 kgf/m, 16 lbf/ft)

    Replace.

    Tighten the bolts in steps, alternating side-to-side.

  10. GASKET

    Replace.

  11. SELF-LOCKING NUT

    10 x 1.25 mm

    33 Nm (3.4 kgf/m, 25 lbf/ft)

    Replace.