Maintenance Schedule for Normal Conditions

(Australian and New Zealand Models)

3-8  

Listed by Distance/Time

Follow the Normal Conditions Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule on 3-10 and 3-11 do not apply.

Service at the indicated distance or time whichever comes first.

km x 1,000

20

40

60

80

100

120

140

160

180

200

miles x 1,000

12

24

36

48

60

72

84

96

108

120

months

12

24

36

48

60

72

84

96

108

120

Replace engine oil

Every 10,000 km (6,000 miles) or 12 months

Replace engine oil filter

l

l

l

l

l

l

l

l

l

l

Replace air cleaner element

 

l

 

l

 

l

 

l

 

l

Inspect valve clearance

 

l

 

l

 

l

 

l

 

l

Replace fuel filter

 

l

 

l

 

l

 

l

 

l

Replace spark plugs

 

l

 

l

 

l

 

l

 

l

Replace timing belt and inspect water pump

 

 

 

 

l

 

 

 

 

 

Inspect and adjust drive belts

 

l

 

l

 

l

 

l

 

l

Inspect idle speed

 

 

 

 

 

l

 

 

 

l

Replace engine coolant

200,000 km (120,000 miles) or 120 months, thereafter every 100,000 km (60,000 miles) or 60 months

Replace transmission fluid

Manual Transmission

 

 

 

 

 

l

 

 

 

 

Automatic Transmission

120,000 km (72,000 miles) or 96 months, thereafter every 80,000 km (48,000 miles) or 48 months

CVT

 

 

 

l

 

 

l

 

 

l

Inspect front and rear brakes

l

l

l

l

l

l

l

l

l

l

Replace brake fluid

Every 36 months

Check parking brake adjustment

l

l

 

l

 

l

 

l

 

l

Check light alignment

l

l

l

l

l

l

l

l

l

l

Test drive (noise, stability, dashboard operation)

l

l

l

l

l

l

l

l

l

l

Visually inspect the following items:

Tie rod ends, steering gearbox and boots

l

l

l

l

l

l

l

l

l

l

Suspension components

Driveshaft boots

Brake hoses and lines (including ABS)

All fluid levels and condition of fluid

Exhaust system

Fuel line and connections

Tyre condition