- Reconnect the battery negative cable.
- Erase the DTC memory.
- Read the DTC.
Is DTC 2-5 indicated?
YES - Go to step 9.
NO - Short to ground in the front passenger's airbag inflator; replace the front passenger's airbag (see page 23-167).
- Disconnect the battery negative cable and wait for 3 minutes.
- Disconnect the D1o connector (A) from the D1i connector (B).
- Disconnect the TL1o and TR1o connectors (A) from the TL1i and TR1i connectors (B).
| |
- Disconnect the U1o connector (A) from the SRS unit (B).
- Disconnect the special tool (2 ohm) from the P1i connector.
- Check resistance between the No. 5 terminal of the U1o connector and body ground, and between No. 14 terminal of the U1o connector and body ground. There should be 1 M ohm or more.
U1o CONNECTOR
Wire side of female terminals
Is the resistance as specified?
YES - Faulty SRS unit; replace the SRS unit (see page 23-176).
NO - Short to ground in dashboard wire harness B; replace dashboard wire harness B.
|