Connect the No. 3 terminal of the U1o connector and the No. 5 terminal of U3o connector with a jumper wire. U3o CONNECTOR Wire side of female terminals Turn the ignition switch ON (II). Check the SRS indicator light. Does the SRS indicator light go off? YES - Faulty SRS unit; replace the SRS unit. NO - Go to step 34. Turn the ignition switch OFF. Disconnect the jumper wire between the No. 3 terminal of the dashboard wire harness B 18P connector and the No. 5 terminal of the U3o connector. Check the No. 13 (10A) fuse in the under-dash fuse/relay box. Is the fuse OK? YES - Go to step 40. NO - Go to step 37. Replace the No. 13 (10A) fuse in the under-dash fuse/relay box.

Disconnect the C1 connector (A) from the gauge assembly. Check resistance between the No. 5 terminal of the U3o connector and body ground. There should be 1 M ohm or more. U3o CONNECTOR Wire side of female terminals Is the resistance as specified? YES - Faulty SRS indicator light circuit in the gauge assembly; replace the gauge assembly. NO - Short to ground in the floor wire harness or in dashboard wire harness A; replace the faulty harness.