Seat Belts

Front Seat Belt Replacement (cont'd)

 23-16  

  1. Remove the centre pillar upper trim (see page 20-206).
  1. Remove the shoulder anchor adjuster (A).

  1. Install the seat belt in the reverse order of removal and note these items:
  • Apply liquid thread lock to the upper anchor bolt before reinstallation.
  • Check that the retractor locking mechanism functions (see page 23-20).
  • Assemble the washers, collar and bushing on the upper and lower anchor bolts as shown.
  • Before installing the anchor bolts, make sure there are no twists or kinks in the front seat belt.
  • Make sure the seat belt tensioner connector is plugged in properly.
  • Reconnect the negative cable to the battery.

Upper anchor bolt construction:

  1. COLLAR
  2. UPPER ANCHOR
  3. UPPER ANCHOR BOLT
  4. BUSHING
  5. TOOTHED LOCK WASHER

Lower anchor bolt construction:

  1. COLLAR
  2. WASHER
  3. COLLAR
  4. LOWER ANCHOR BOLT
  5. BUSHING
  6. LOWER ANCHOR
  7. SPRING WASHER
  8. TOOTHED LOCK WASHER