- Reconnect the battery negative cable.
- Erase the DTC memory.
- Read the DTC.
Is DTC 12-3 indicated?
YES - Go to step 9
NO - Short to another wire in the right side airbag inflator; replace the right side airbag.
- Disconnect the battery negative cable and wait for 3 minutes.
- Disconnect the SLi connector (A) from the left side airbag (B).
- Disconnect the special tool (2 ohm) from the SRi connector.
| |
- Disconnect the U2o connector (A) from the SRS unit (B).
- Check resistance between the No. 7 and No. 18 terminals of the U2o connector. There should be 1 M ohm or more.
U2o CONNECTOR
Wire side of female terminals
Is the resistance as specified?
YES - Faulty SRS unit; replace the SRS unit.
NO - Short to another wire in the floor wire harness; replace the floor wire harness.
|