For some models: SRS components are located in this area. Review the SRS component locations (see page 23-23), and the precautions and procedures (see page 23-25) in the SRS section before performing repairs or service.

NOTE:

• Take care not to tear the seams or damage the seat covers.
• Put on gloves to protect your hands.
• When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
• The left side seat is shown, the right side seat is symmetrical.

Disassemble the seat as shown.

Reassemble the seat in the reverse order of disassembly, and note these items:

• Apply multipurpose grease to the moving portion of the seat track.
• To prevent wrinkles in the seat cushion cover, stretch the material evenly over the pad.

  HOOKS (Five places) HOOKS Release the seat cushion cover from the cushion frame spring. HOOKS HEADREST SEAT-BACK SIDE AIRBAG HARNESS (For some models) WIRE TIE HOOK RECLINE COVER CLIP RECLINE KNOB HEIGHT HANDLE CAP CLIP HOOK CLIP SEAT HEATER UNIT (For some models) SLIDE LEVER SEAT CUSHION FRAME/SEAT TRACKS CLIP CENTRE COVER SEAT HEATER HARNESS (For some models) CLIP HANGER SPRING (With side airbag)