For some models: SRS components are located in this area. Review the SRS component locations (see page 23-24) and the precautions and procedures (see page 23-25) in the SRS section before performing repairs or service.

NOTE:

• Take care not to tear the seams or damage the seat covers.
• Put on gloves to protect your hands.
• When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

Disassemble the seat as shown.

Reassemble the seat in the reverse order of disassembly and note these items:

• Apply multipurpose grease to the moving portion of the seat track.
• To prevent wrinkles in the seat cushion cover, stretch the material evenly over the pad.

  SEAT-BACK HEADREST HOOKS Release the seat cushion cover from the cushion frame spring. HOOKS HANGER SPRING (With side airbag) CLIP HOOKS (Five places) SEAT HEATER HARNESS (For some models) HOOK CENTRE COVER HOOKS CLIP CLIP SEAT CUSHION FRAME/SEAT TRACKS SLIDE LEVER SEAT HEATER UNIT (For some models) CLIP HOOK CLIP CLIP CAP HEIGHT HANDLE RECLINE KNOB CLIP RECLINE COVER HOOK SIDE AIRBAG HARNESS