- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.
- Remove the seat-back (see page 20-96).
- If equipped, remove the armrest (see page 20-98).
- Release all the clips (A) and hook strips (B) (with armrest), and fold back the seat-back cover (C).
- Pull back the edge of the seat-back cover (A) all the way around, and release the clips (B), then remove the seat-back cover.
- Install the cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hooks and clips.
- Replace any clips you removed with new ones. Install them with commercially available upholstery ring pliers.