| Terminal number |
Wire colour |
Terminal sign (Terminal name) |
Description |
Measurement (Disconnect the ABS control unit connector |
| Terminals |
Conditions |
Voltage |
| 11 |
BRN/YEL |
EBD (Electronic brake distribution) |
Drives brake system indicator |
11 - GND |
Engine running, parking brake |
Pressed |
Below 0.3V |
| Released |
Battery voltage |
| 12 |
BRN/WHT |
FLW (-) (Front-left wheel negative) |
Detects left-front wheel sensor signal |
12 - 3 |
Wheel |
Spin wheel at 1 turn/ second |
AC: 0.053V or above Reference Oscilloscope 0.15 Vp-p or above |
| 13 |
BRN |
SCS (Service check signal) |
Detects service check connector signal (DTC indication or DTC clearing) |
——— |
——— |
——— |
| 14 |
GRY/RED |
RLW (-) (Rear-left wheel negative) |
Detects left-rear wheel sensor signal |
14-5 |
Wheel |
Spin wheel at 1 turn/ second |
AC: 0.053V or above Reference Oscilloscope 0.15 Vp-p or above |
| 15 |
GRN/WHT |
RRW (+) (Rear-right wheel positive) |
Detects right-rear wheel sensor signal |
15-6 |
| 16 |
BLK/ORN |
IG2 (Ignition 2) |
Power source for activating the system |
16-GND |
——— |
Battery voltage |
| 18 |
GRN/BLK |
FRW (+) (Front-right wheel positive) |
Detects right-front wheel sensor signal |
18-2 |
Wheel |
Spin wheel at 1 turn/ second |
AC: 0.053V or above Reference Oscilloscope 0.15 Vp-p or above |
| 24 |
BLK |
GND1 (Ground 1) |
Ground |
——— |
——— |
——— |
| 25 |
BLK |
GND2 (Ground 2) |
Ground |
——— |
——— |
——— |