Disconnect the gauge assembly connector B (22P) and go to step 10 for 4-door model. Disconnect the gauge assembly connector A (22P), and go to step 12 for 5-door model. Check for continuity between the gauge assembly connector B (22P) terminal No. 15 and body ground. GAUGE ASSEMBLY CONNECTOR B (22P) Wire side of female terminals Is there continuity? YES - Repair short to body ground in the wire between the gauge assembly and the ABS control unit. NO - Go to step 11. Check for continuity between the gauge assembly connector B (22P) terminal No. 18 and body ground. GAUGE ASSEMBLY CONNECTOR B (22P) Wire side of female terminals Is there continuity? YES - Check for loose terminals in the gauge assembly connectors. If the connectors are OK, replace the printed circuit board in the gauge assembly. NO - Repair open in the wire between the gauge assembly and body ground (G501).

Check for continuity between the gauge assembly connector A (22P) terminal No. 12 and body ground. GAUGE ASSEMBLY CONNECTOR A (22P) Wire side of female terminals Is there continuity? YES - Repair short to body ground in the wire between the gauge assembly and the ABS control unit. NO - Go to step 13. Check for continuity between the gauge assembly connector B (22P) terminal No. 12 and body ground. GAUGE ASSEMBLY CONNECTOR B (22P) Wire side of female terminals Is there continuity? YES - Check for loose terminals in the gauge assembly connectors. If the connectors are OK, replace the gauge assembly. NO - Repair open in the wire between the gauge assembly and body ground (G501).