Conventional Brake Components

Rear Drum Brake Inspection (cont'd)

 19-36  

5-door
  1. WHEEL CYLINDER

    Inspect for leakage.

  2. ADJUSTER BOLT

    Check ratchet teeth for wear and damage.

  3. PARKING BRAKE LEVE,

    Marked left and right.

  4. UPPER RETURN SPRING

    Check for weakness and damage.

  5. WAVE WASHER
  6. U-CLIP

    Replace.

  7. LOWER RETURN SPRING

    Check for weakness and damage.

  8. RETAINER SPRING

    Install securely on tension pin.

  9. SELF-ADJUSTER SPRING

    Check for weakness and damage.

  10. SELF-ADJUSTER LEVER
  11. BRAKE SHOE

    If brake shoes are to be reused, mark and reassemble in the same position.

  12. CLEVIS A
  13. CLEVIS B
  14. 10 mm BOLT

    64 Nm (6.5 kgf/m, 47 lbf/ft)

  15. BACKING PLATE

    Marked left and right.

  16. TENSION PIN