- Install the reverse shift fork.
- Install the reverse idler gear (A) and reverse gear shaft (B).
| |
- Select the proper size 72 mm shim (A) according to the measurements made during the Mainshaft Thrust Clearance Adjustment (see page 13-40). Install the oil gutter plate (B), oil guide plate (M) and 72 mm shim into the transmission housing (C).
- Remove any dirt and oil from the transmission housing sealing surface. Apply liquid gasket (P/N 08718-0001) to the sealing surface. Be sure to seal the entire circumference of the bolt holes to prevent oil leakage.
NOTE: If 5 minutes have passed after applying liquid gasket, reapply it and assemble the housings. Allow it to cure at least 20 minutes after assembly before filling the transmission with oil.
- Liquid gasket
|