- Measure distance 2 between the end of the clutch housing (A) and bearing inner race (B) with a straight edge and depth gauge. Measure at three locations and average the readings.
Shim Selection Formula:
- Select the proper 72 mm shim from the chart. Follow the example below, and use the measurements you made in steps 4 and 5:
- Add distance 2 (step 5) to distance 1 (step 4).
- From this number, subtract 0.95 (which is the midpoint of the flex range of the clutch housing bearing spring washer).
- Take this number and compare it to the available shim sizes in the chart.
- Try the 1.68 mm (0.0661 in.) shim.
(For example)
| 1: 2.41 | 2.63 |
| +2: 0.22 | -0.95 |
| ------------ | ------------ |
| = 2.63 | = 1.68 |
| Part Number | Thickness | |
| A | 23931-P21-000 | 0.60 mm (0.0236 in.) |
| B | 23932-P21-000 | 0.63 mm (0.0248 in.) |
| C | 23933-P21-000 | 0.66 mm (0.0260 in.) |
| D | 23934-P21-000 | 0.69 mm (0.0271 in.) |
| E | 23935-P21-000 | 0.72 mm (0.0283 in.) |
| F | 23936-P21-000 | 0.75 mm (0.0295 in.) |
| G | 23937-P21-000 | 0.78 mm (0.0307 in.) |
| H | 23938-P21-000 | 0.81 mm (0.0319 in.) |
| I | 23939-P21-000 | 0.84 mm (0.0331 in.) |
| J | 23940-P21-000 | 0.87 mm (0.0343 in.) |
| K | 23941-P21-000 | 0.90 mm (0.0354 in.) |
| L | 23942-P21-000 | 0.93 mm (0.0366 in.) |
| M | 23943-P21-000 | 0.96 mm (0.0378 in.) |
| N | 23944-P21-000 | 0.99 mm (0.0390 in.) |
| O | 23945-P21-000 | 1.02 mm (0.0402 in.) |
| P | 23946-P21-000 | 1.05 mm (0.0413 in.) |
| Q | 23947-P21-000 | 1.08 mm (0.0425 in.) |
| R | 23948-P21-000 | 1.11 mm (0.0437 in.) |
| S | 23949-P21-000 | 1.14 mm (0.0449 in.) |
| T | 23950-P21-000 | 1.17 mm (0.0461 in.) |
| U | 23951-P21-000 | 1.20 mm (0.0472 in.) |
| V | 23952-P21-000 | 1.23 mm (0.0484 in.) |
| W | 23953-P21-000 | 1.26 mm (0.0496 in.) |
| X | 23954-P21-000 | 1.29 mm (0.0508 in.) |
| Y | 23955-P21-000 | 1.32 mm (0.0520 in.) |
| Z | 23956-P21-000 | 1.35 mm (0.0531 in.) |
| AA | 23957-P21-000 | 1.38 mm (0.0543 in.) |
| AB | 23958-P21-000 | 1.41 mm (0.0555 in.) |
| AC | 23959-P21-000 | 1.44 mm (0.0567 in.) |
| AD | 23960-P21-000 | 1.47 mm (0.0579 in.) |
| AE | 23961-P21-000 | 1.50 mm (0.0591 in.) |
| AF | 23962-P21-000 | 1.53 mm (0.0602 in.) |
| AG | 23963-P21-000 | 1.56 mm (0.0614 in.) |
| AH | 23964-P21-000 | 1.59 mm (0.0626 in.) |
| AI | 23965-P21-000 | 1.62 mm (0.0638 in.) |
| AJ | 23966-P21-000 | 1.65 mm (0.0650 in.) |
| AK | 23967-P21-000 | 1.68 mm (0.0661 in.) |
| AL | 23968-P21-000 | 1.71 mm (0.0673 in.) |
| AM | 23969-P21-000 | 1.74 mm (0.0685 in.) |
| AN | 23970-P21-000 | 1.77 mm (0.0697 in.) |
| AO | 23971-P21-000 | 1.80 mm (0.0709 in.) |
