Engine Assembly

Engine Removal (cont'd)

 5-5  

  1. Remove the harness clamps (A) and grommet (B), then pull the engine wire harness through the bulkhead.

LHD models:

RHD models:

  1. Relieve fuel pressure (see page 11-115).
  1. Remove the fuel feed hose (see page 11-120).
  1. Remove the Evaporative Emission (EVAP) canister hose (A) and brake booster vacuum hose (B).

  1. Remove the clutch slave cylinder (A) and clutch line bracket mounting bolt (B).