Clutch

Slave Cylinder Overhaul

 12-10  

  1. ROLL PINS

    Replace

  2. BLEEDER SCREW CAP
  3. BLEEDER SCREW

    8 Nm (0.8 kgf/m, 5.8 lbf/ft)

  4. O-RING

    Replace

  5. SLAVE CYLINDER BODY

    Check the cylinder wall for scoring and wear

  6. (Brake Assembly Lube)
  7. PISTON CLIP

    Replace

  8. SLAVE CYLINDER PISTON

    Check for wear and damage.

  9. SLAVE CYLINDER SPRING

    Install with small end facing piston.

  10. BOOT

    Check that it is fitted securely over the cylinder body.

  11. PUSH ROD
  12. Urea Grease UM 264

    (P/N 41211-PY-5-305)

  13. (Brake Assembly Lube)

aaa