At the wire harness side, check for continuity between TP sensor 3P connector terminal No. 2 and body ground. TP SENSOR 3P CONNECTOR Wire side of female terminals Is there continuity? YES - Repair short in the wire between the ECM (A15) and the TP sensor. NO - Go to step 12. Connect ECM connector terminal A15 and body ground with a jumper wire. ECM CONNECTOR A (31P) Wire side of female terminals

At the wire harness side, check for continuity between TP sensor 3P connector terminals No. 2 and body ground. TP SENSOR 3P CONNECTOR Wire side of female terminals Is there continuity? YES - Substitute a known-good ECM and recheck (see page 11-5). If the symptom/indication goes away, replace the original ECM. NO - Repair open in the wire between the ECM (A15) and the TP sensor. Measure voltage between ECM connector terminals A10 and A20. ECM CONNECTOR A (31P) Wire side of female terminals Is there about 5 V? YES - Repair open in the wire between the ECM (A20) and the TP sensor. NO - Substitute a known-good ECM and recheck (see page 11-5). If the symptom/indication goes away, replace the original ECM. aaa