Cylinder Head

Camshaft Inspection (cont'd)

6-17  

  1. Check the total runout with the camshaft supported on V-blocks.
  • If the total runout of the camshaft is within the service limit, replace the cylinder head.
  • If the total runout is beyond the service limit, replace the camshaft and recheck the camshaft-to-holder oil clearance. If the oil clearance is still out of tolerance, replace the cylinder head.

Camshaft Total Runout:

Standard (New):0.03 mm (0.001 in.) max.

Service Limit:0.04 mm (0.002 in.)

  1. Measure cam lobe height.

    Cam Lobe Height Standard (New):

      INTAKE EXHAUST
    D14Z6 engine 34.158 mm
    (1.3448 in.)
    36.488 mm
    (1.4365 in.)
    D16V1, D16V3 engines PRI 38.427 mm
    (1.5129 in.)
    38.784 mm
    (1.5269 in.)
    SEC 32.848 mm
    (1.2932 in.)

PRI: PrimarySEC: Secondary

IN: IntakeEX: ExhaustT/B: Timing Belt

D16V1, D16V3 engines: