NOTE:

• Identify parts as they are removed to ensure reinstallation in original location.
• Inspect the rocker shafts and rocker arms (see page 6-15).
• The rocker arms must be installed in the same positions if reused.
• When removing or installing the rocker arm assembly, do not remove the camshaft holder bolts. The bolts will keep the holders, springs and rocker arms on the shaft.
• Prior to reassembling, clean all the parts in solvent, dry them and apply lubricant to any contact points.

D16V1, D16V3 engines:

RUBBER BAND INTAKE ROCKER SHAFT COLLAR B INTAKE ROCKER ARM ASSEMBLY COLLAR A No. 1 CAMSHAFT HOLDER EXHAUST ROCKER ARM A Letter "A" is stamped on the rocker arm. EXHAUST ROCKER SHAFT Letter "B" is stamped on the rocker arm. SPRING EXHAUST ROCKER ARM B No. 5 CAMSHAFT HOLDER No. 4 CAMSHAFT HOLDER No. 3 CAMSHAFT HOLDER No. 2 CAMSHAFT HOLDER