If you suspect a problem with the fuel pump, check that the fuel pump actually runs; when it is ON, you will hear some noise if you listen to the fuel fill port with the fuel fill cap removed. The fuel pump should run for 2 seconds when the ignition switch is first turned on. If the fuel pump does not make noise, check as follows: Turn the ignition switch OFF. Remove the glove box, refer to the '01 Civic Shop Manual on this CD (see page 20-220), then remove the PGM-FI main relay 2 (A). Turn the ignition switch ON (II). Measure voltage between the PGM-FI main relay 2 4P connector terminal No. 4 and body ground. Wire side of female terminals Is there battery voltage? YES - Go to step 5. NO - Repair open in the wire between the PGM-FI main relay 1 and the PGM-FI main relay 2.

Measure voltage between the PGM-FI main relay 2 4P connector terminal No. 1 and body ground. Wire side of female terminals Is there battery voltage? YES - Go to step 6. NO - Repair open in the wire between the under dash fuse/relay box and PGM-FI main relay 2. Turn the ignition switch OFF. Disconnect ECM/PCM connector E (31P). Check for continuity between the PGM-FI main relay 2 4P connector terminal No. 3 and ECM/PCM connector terminal E1. Wire side of female terminals Is there continuity? YES - Go to step 9. NO - Repair open in the wire between the PGM-FI main relay 2 and the ECM/PCM (E1).